Want this question answered?
i have 85 cavalier how you get key cycliner out
How to drill out ignition switch on 1985 ford f150?
Remove the retaining ring at the top of your 1985 Chevy ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
You're going to have to unbolt the steering column and drop it down. The ignition switch will be on the top of the column along with your high beam switch. Unbolt the switch then unplug it.
The 1985 Chevrolet El Camino ignition switch can be removed by loosening the retaining ring at the top of the switch. The switch will slide out. Remove the wiring harness from the back of the ignition switch.
top of colum under dash
Remove the switch by boring out the rivets holding it in place. The cylinder will come out easily once you get the lock free from its casing.
Check bulbs Fuse Stop light switch
The actual problem is the starter continues to turn after key is turned off and pulled out of ignition.
it could be something wrong with the ignition switch, and or alarm
The main Ignition wire from the switch is dark blue, look under your steering column, and there are screws to separate a piece of plastic, directly behind your steering wheel, and you will see the dark blue wire coming from the switch
If you are talking about the ign switch and not key switch. It is located under the dash, mounted on top the steering column