Want this question answered?
by buying a poptart
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
there is one unit attactch to the key barrel and plugs into the com 2000 unit (back of wiper /indicator arm )
There's 2 answers to this question! ...and this is because Peugeot redesigned the wipers on 206's built around 2001, so...On older 206's (approx 1998 - 2000)Drivers side* = 19" (480mm)Passenger side* = 26" (660mm)*Note applies to UK spec models onlyOn newer 206's (approx 2001 - 2005)Both drivers & passenger = 22" (555mm)Rear wiper blades are 14" (355mm) however generic blades won't fit on the rear due to the arm design, so you will need to order rear blades specifically for the 206.
take the bottom ball joint bolts n nut out,take nut n bolt of front bush on wishbone ,go inside the front of the car and lift the carpet ,there is two nuts under there ,15 mm ones take them of ,reverse to put back on
located under the indicator arm
press the button! press the button!
You can change the wiper blades by removing the retaining clip to the wiper blade arm. The wiper blade will come off and can be replaced.
take it out and put in another
It's because of the route it takes from the pedal to the arm at the other end. If you ever have to change one (I did two weeks ago-grrr) then you will understand/see why. Chris.
not sure if a partner is the same but I asked the same question to a dealer regarding the 407 SW rear wiper arm as mine was not positioned correctly and was told they could only be removed by breaking off and replaced with a new arm!
push the left indicator arm down