0
How do you change the intake manifold on a 1996 crown Victoria?
Wiki User
∙ 13y ago
This is about an 8 hour job. Start with draining the rad of coolant. You do not have to remove the fuel rail, just move it aside. Best is to take a picture of the intake before, gives you some reference to finish the job. Now, start with removing everything else that has to be removed. Torque the new intake to spec's.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can you use a 1993 ford crown victoria intake manifold in your 1996 ford crown victoria?
Yes
Where is the intake manifold gasket located on 1989 crown Victoria?
The gasket is between the head and the intake.
On a 2003 Ford Crown Victoria where is the intake air temperature sensor located?
lower intake manifold, 2 wire conector
What are the torque specs for a 4.6 2004 Ford Crown Victoria's intake manifold?
18 ft lbs
What is the vacuum hose diagram for a 1992 Crown Victoria What hose is connected to the brake booster?
you need manifold vacuum for the brake booster.. (intake manifold)
Where is the fuel intake on a 1989 ford ltd Crown Victoria?
The intake manifold is an air intake. There isn't something that you refer to as a fuel intake. Fuel is introduced to the cylinders directly at the intake valves by the fuel injectors.
What is the water hose under the intake manifold called on a 1993 ford crown Victoria?
On a 4.6L engine, I have never seen a water hose under the intake. Anybody else?
What is the cooling line under intake manifold on 94 crown Victoria called?
Heater Core Return Hose. Stick to the factory one.
What were the safety concerns of the Ford Crown Victoria sedan?
There was one main safety concern of the Ford Crown Victoria sedan. The main safety concern of the Ford Crown Victoria sedan was the fuel tank sometimes were to leak. Another safety concern was the intake manifold defect which was also a leak.
Does the 2001 crown Victoria have an aluminun intake manifold?
No the 2001 Crown Vic does not have a aluminum intake , it has a composite plastic intake. as did all 96 to 01 Crown Vics. Starting in 02 Ford started using a different type of plastic intake with a aluminum front water crossover due to a class action lawsuit.
Where do you find the idle air control valve on a 2001 Ford Crown Victoria?
its on the back side of the thottle body on top of the intake manifold. There are some good pictures showing the location and instructions for repair/replacement at Autoclinix.com specifcally for the Crown Victoria.
Where is your thermostat at on your car 1988 crown Victoria LTD 5.0L engine?
On your 1988 FordLTD Crown Victoria , 5.0 Follow the TOP radiator hose from the radiator to the front of the engine The engine cooling thermostat is in the front of the intake manifold where the radiator hose connects
