Want this question answered?
Buy a new CV Axle Halfshaft and a new axle nut comes with it.
It is best to replace the whole axle, Its easy to do not to mention pretty inexpensive....
No. just remove the calipers
You don't. If the axle beam is bent you replace it, if the frame is bent you sell it CHEAP and FAST.
how t change rar axle seal on 04 ford escape xlt
I believe axle code " 39 " in a 1989 Ford F-250 is a : ( conventional / non limited slip with 3.55 gears )
Measure from center of front axle to center of rear axle.
yes and no... all aspire suspension parts front and rear will bolt directly to the festiva body... however the parts are not the same so you have to change the entire structure over to aspire suspension.. the 2 cars share a few individual parts like axle beam and various nuts and bolt. the aspire and festiva also have different wheel lug patterns so you need to have aspire wheels also and spare.... so if you change only the front or only the rear you will need to carry 2 spares.
Th easiest way to change the rotors on a 1990 Ford Festiva is to pay someone. However, remove the tire, remove caliper, remove the hub nut and washer. Remove the rotor from the CV axle. There four bolts on the back side of the rotor, but you may have to press out the rotor bearing. To re-install read backwards
THERE WAS NO FORD PROBE IN MODEL YEAR 1985
Dana 44 Twin Traction Beam
if it's like a Honda you have to pull the wheel & cv axle then it comes out no prob