Unscrew the plastic light covers. There should be 2 screws for each cover. Gently grab the light bulb with your thumb and forefinger and pull it straight out. Replace the old bulb with a new one by gently inserting it into the open socket. Repeat this procedure for the other side. NOTE: Turn the headlight switch on before you put the bulb covers back on. If the new bulbs illuminate, then you have succeeded and you can now put the covers back on.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
how do you change the light bulb over the license plate on 2000 eclipse
how do you change the rear license plate light on a 1999 Buick Regal
show please how change plate light on an 2007 nissan sentra
If your license plate light is out change the bulb in it, if you have taillights your fuse is good as the license plate light uses the same fuse as the taillights.
on the 2001 XZ3 I removed the license plate and used a flat head screw driver to slid the license plate light cover over and they "pop" out.
license plate light just pops out of the bumper with a screw driver.u can buy a new light at auto store or just change the light bulb
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300
How do you change the liscence plate light fuse
=== ===
Open your trunk and find the wires that go to the bulb over the license plate. Twist the base to remove the light.