How do you change the liscence plate light fuse
Remove the plastic cover on the outside and just pull the bulb out
To change the license plate light bulb on a Mazda Protege, first, locate the license plate light assembly at the rear of the vehicle. Use a flathead screwdriver to gently pry open the assembly cover. Remove the old bulb by twisting it counterclockwise and then insert the new bulb, making sure it’s secure. Finally, replace the cover and ensure the light functions properly.
You need to unscrew the whole cover panel for license plate.
how do you replace license pate light on 2006 pontia g6
Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
To replace the license plate bulbs on a 2002 Mazda Miata, first, open the trunk and locate the license plate light assembly on the rear of the car. Use a flathead screwdriver to gently pry off the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it, then insert the new bulb by twisting it clockwise until secure. Finally, reattach the light cover and test the new bulbs to ensure they are working.
Open up your trunk and look up above the license plate. It is held in by screws. undo the screws adn unit drops down.
To change the license plate bulb in a Mazda MPV, first, open the rear hatch and locate the license plate light assembly. Using a flathead screwdriver, gently pry off the lens cover to access the bulb. Remove the old bulb by twisting it counterclockwise, then insert the new bulb in the same manner. Finally, replace the lens cover and ensure it is securely in place.
Open the trunk. Turn the socket counterclockwise and remove. Then gently pull out the light bulb. Place the new bulb in the socket and replace the socket into the lens by turning clockwise. Replacement light bulb #3652.
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
Superdiscount LEDs has a tutorial out how to change the license plate light to an LED light. Its pretty general how to do but a lot easier with pictures. Heres to step by step links that should help you! http://www.superdiscountleds-how-to-install-leds.webs.com/ -OR- http://www.go-audi.com/14083-audi-q5-how-do-i-replace-license-plate-bulbs.html Source: www.superdiscountleds.com