Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.
To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
The license plate lights are located just above the license plate. Open the tail gate part way to make removal easier (unless you enjoy squatting). Remove the Phillips screws and replace the affected bulb.
To replace the license plate bulbs on a 2002 Mazda Miata, first, open the trunk and locate the license plate light assembly on the rear of the car. Use a flathead screwdriver to gently pry off the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it, then insert the new bulb by twisting it clockwise until secure. Finally, reattach the light cover and test the new bulbs to ensure they are working.
To change the license plate bulb on a 2002 Acura RSX, first, locate the license plate light assembly, which is usually found above the license plate. Use a flathead screwdriver or a small tool to gently pry off the cover of the light assembly. Once exposed, twist the old bulb counterclockwise to remove it, then insert the new bulb and twist it clockwise to secure it. Finally, replace the light cover and ensure it’s properly snapped into place.
To replace the license plate bulb on a 2002 Toyota Sequoia, first, open the rear hatch and locate the license plate light assembly above the license plate. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover by snapping it back into place. Finally, test the new bulb to ensure it's functioning properly.
Reach under the truck bumper and you should feel the backside of the license plate light unit. Give it a small turn and pull the unit out. Then pull out the bulb and replace with the new bulb and return the unit back to original location.
Added to that, and assuming that you're asking because your license plate light is out, and because the fuse is the same fuse for the tail lights, then the problem is not the fuse. It's the license plate light itself. === It should be the same fuse as the taillights.
no.
hello i need you help me tell me how to remove the cover light from a license plate i have a ford focus se 2002 to put a new light thanks willie
Probably in line with tail lights.
you can see the plugs on the back of the light. lift the trunk and look past the license plate . the twist out . righty tighty lefty lousy . pull them out. its tight but they come out. use needle nose pliars, but be gentle.