answersLogoWhite

0

Reach under the truck bumper and you should feel the backside of the license plate light unit. Give it a small turn and pull the unit out. Then pull out the bulb and replace with the new bulb and return the unit back to original location.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace license plate light 2002 530i BMW?

Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.


Do 2002 Ford Focus have 2 lights on license plate?

yes 2002 Ford Focus do have 2 lights on license plate


How do you replace license plate bulb on 2002 Toyota Sequoia?

To replace the license plate bulb on a 2002 Toyota Sequoia, first, open the rear hatch and locate the license plate light assembly above the license plate. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover by snapping it back into place. Finally, test the new bulb to ensure it's functioning properly.


How do you replace the license plate light bulb on a 2002 Pontiac Grand Prix?

The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.


How do I change the license plate light in a 2002 Geo Tracker?

To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.


How do you change the license plate light on 2002 Mercury Villager?

The license plate lights are located just above the license plate. Open the tail gate part way to make removal easier (unless you enjoy squatting). Remove the Phillips screws and replace the affected bulb.


How do you replace one of the rear license plate bulbs on a 2002 Buick Regal?

OPEN THE TRUNK LID. JUST INSIDE THE LID BEHIND THE LICENSE BULB CASE ARE 2 PHILIP HEAD SCREWS THAT REMOVE THE BACKING PLATE. ONCE YOU REMOVE IT YOU CAN REPLACE BOTH LITTLE BULBS. THEN PUT THE PLATE AND SCREWS BACK IN YOUR READY TO GO.....


How do you change a license plate lamp in a 2002 Lincoln LS?

How do you change the lamp on the license plate of a lincoln ls 2000?


How do you change the license plate bulb on a 2002 Lincoln LS?

Changing the license plate bulb on a 2002 Lincoln LS is quite simple. You must first remove the license plate first. Then unscrew the old bulbs and screw in your new ones.


How do you replace license plate bulbs 2002 miata?

To replace the license plate bulbs on a 2002 Mazda Miata, first, open the trunk and locate the license plate light assembly on the rear of the car. Use a flathead screwdriver to gently pry off the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it, then insert the new bulb by twisting it clockwise until secure. Finally, reattach the light cover and test the new bulbs to ensure they are working.


How do you change the license plate bulb on 2002 Acura RSX?

To change the license plate bulb on a 2002 Acura RSX, first, locate the license plate light assembly, which is usually found above the license plate. Use a flathead screwdriver or a small tool to gently pry off the cover of the light assembly. Once exposed, twist the old bulb counterclockwise to remove it, then insert the new bulb and twist it clockwise to secure it. Finally, replace the light cover and ensure it’s properly snapped into place.


How do you change license plate in 2002 corvette?

how incomptent are you not to see the 2 screws holding the plate on????????????????