0
What else can I help you with?
Chevy Tahoe's license plate bulb?
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
How do you locate and identify the fuse for the license plate light for a 2004 Chevy Impala 4d v6 3.4liter engine?
I think for most cars, the license plate lamp is on the same fuse as the taillights, so if the taillights are working, and the license plate lamp isn't, check the globe or the wire
Does the 2001 Chevy cavalier have a rear license plate light?
Yes, all cars have a license plate light. It is mandated by law.
Is there a license plate light on a 2000 Chevy Malibu?
yes there is, just above rear plate.
How do you replace a license plate lamp on a 2003 Chevy impala?
there should be little screws that you screw out and they pop out and you twist the bulb to remove it
Was the 1989 Chevy G20 van manufactured with a license plate light?
yes it was
How do you change a license plate lamp in a 2006 Chevy Equinox?
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do you change out the license plate light on a 98 Chevy Cavalier?
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
Can one missing license plate light cause the other not to work in a 2002 Chevy blazer?
no.
Which fuse is for license plate light on 1994 Chevy astro van?
fuse box location
How do you put a license plate holder on a 2004 Chevy Malibu?
take off the license plate then screw the holder on with the plate.
How do you change a license plate bulb in a 2001 Chevy impala and what kind of bulb does it need?
AnswerThere are two screws for each bulb fixture. Get down on the ground and you'll see them at the tag light. They are 7mm screws. Unscrew them til loose. You don't have to take them off all the way. After unscrewing them, slide lighting fixture away from bumper, and twist the bulb to the left, and pull it out. The license plate light bulb size is 194. You will probably have to take off the license plate in order to reach the bulb fixtures.
