how to change 2005 equinox license plate light i removed the screws but it didn't release
there should be little screws that you screw out and they pop out and you twist the bulb to remove it
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
Added to that, and assuming that you're asking because your license plate light is out, and because the fuse is the same fuse for the tail lights, then the problem is not the fuse. It's the license plate light itself. === It should be the same fuse as the taillights.
I think for most cars, the license plate lamp is on the same fuse as the taillights, so if the taillights are working, and the license plate lamp isn't, check the globe or the wire
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
take off the license plate then screw the holder on with the plate.
Kaz 2y5
the plug on the back side of the bumper twists to the left and you pull it out of the bumper
Yes, all cars have a license plate light. It is mandated by law.
How do you change the lamp on the license plate of a lincoln ls 2000?