in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
you tell me how to change head light bulb on 2009 chevy malibu.
yes there is, just above rear plate.
You're going to have to change the hazard light button on the dash
how to change 2005 equinox license plate light i removed the screws but it didn't release
It means some type of routine service is required, usually oil change.
Chevy Dealer.
The fog lights on a Chevy Malibu can be reached from under the car. Pull off the old lights and toss out the bulb. Replace with a new bulb and reinsert the light in the fog housing.
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
yes? and why?
Alternator is not charging. Have it tested and/or replaced.
Yes it does.