Want this question answered?
you have to remove the lens cover. look for screws to take it off. then the speedometer pulls out and the bulbs are behind.
You can't you have to replace the whole dashboard instrument cluster assy.
Behind the glovebox.
If the ABS light is flashing it means the system is malfunctioning but still working. The dash light behind the speedometer is burnt out.
You have to reach under the dash behind the gauges and twist the rectangular knobs. There should be 2 behind the speedometer, 2 behind the rpm's, 2 for the blinkers, and 2 at the bottom of the rpm gauge. The bulbs will be in the knobs.
Passenger side behind the glovebox
U HAVE TO REMOVE THE SPEEDOMETER FACE PLATE, AND REMOVE THE SPEEDOMETER AND THERE ARE ALL THE LIGHTS ON THE BACK PART OF THE SPEEDOMETER, PD:BE CAREFULL WHEN REMOVING THE SPEEDOMETER THERE IS A SPPEDO CABLE UNDER NEED U HAVE TO DISCONECT THE CABLE FROM BEHIND.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired
It is practically impossible to reach up behind the dash to change the bulbs. Remove the trim around the instrument panal and you should be able to pull it out enough to change the bulbs. You may have to disconnect the speedometer to get it out far enough.
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
you have to take the dash apart,unhook wires from the back of the panel.then unplug the bulb from the socket,and replace with new bulb,then reattatch the wires and rplace dash
You can not change the time frame for when the light will come on. It is part of the computer programming.