Hi, to change your lights in the speedometer(cluster),remove the trim piece from around the gauges, with a small flat screwdriver. Place tape on the metal end of the driver, as not to scratch the plastic trim. Gently and evenly pull off the trim cover. Now,thecluster has 6 to 8 screws, remove them with a magnet tip driver. With the screws out, now tilt the cluster out towards you . You'll see a wire harness attached to the back of the cluster. You can undo the harness from the cluster for easy bulb replacement .Remember ,when replacing bulbs make sure they're the correct size and watts. Best to check with your dealer or automotive shop. The cluster goes back in the same way. Also, the bulbs come out with only a half a trun.
How to change dash lights on a 95 Ford Ranger?
yes
you probably need to change your fuses you probably need to change your fuses
no
Very carefully!
the dash lights went out in our older 1995 monti Carlo does the whole dash need to be taken apart or are you able to change lamps from behind
check the dome light fuse that could be the problem.......or interior fuse Instrument lights.
Probably a fuse that has expired, change it.
yes you can
You probably don't need to change the dash lights. On the headlight panel there is a control to dim or brighten the dash lights. This same control allows you to turn them completely off. I don't remeber on that particular car if the light switch rotates or has a separate switch but all cars have this feature.
to change the lights you remove the dash cluster and replace the bulbs. the number for the bulbs are 197
Change the lightbulb.