Buick Riviera

How do you change the low beam bulb in a 1997 Buick Riviera?

333435

Top Answer
User Avatar
Wiki User
Answered
2009-01-03 18:30:18
2009-01-03 18:30:18

It's really easier than you think. Loosen the wing nut that holds the air filter hose, pull the hose back and turn it out of the way (it is softer and more flexible than it looks). Pull off the electrial connection on the filter cover (I used diagonals to grab and lift it), unlock the two clips on the filter cover and remove cover, this will open up alot of space behind the headlight. The smaller your hands are the easier it will be to remove & replace the bulb. Good luck! Ronagade

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


check the fuses then check high/low beam switch

To replace the lights in your car you need to unscrew the headlight cover on your Buick. Once this is removed you can unscrew and replace the old bulb.

change low beam lite in 1999 suburban

how to change out low beam on 2005 hyundai sonata?

Take the light assy off and take the bulbs out the back.

I have a 1998 Buick LeSabre and to remove the headlights there are two screws on the front just to the inside of the high beam. Once you take these two screws out the headlight should slide towards the outside of the car and you can unplug the wire connector and you now have ht headlights off.

How do I change the low beam bulb in a gmc sierra 2005?

It may be simply that you were running with only one low beam instead of 2 and both are now burned out. If not, then the high beam switch or relay went bad.

A beam of light becoming dimmer is a physical change since it is reversible. Recharging its source will make the light beam bright again.

The low beam headlamps, on a 2006 Buick lacrosse CXS, can be changed by first locating the bulb on the back of the headlight. Grasp the bulb, push in and turn, and the bulb will come out. Insert the new bulb.

the high and low beam work on the same bulb... if your low beam isn't working the problem is electrical

you have to change the beam to another one that could be hollow and most likely change it to a triangle beam because it is the strongest shape

how do you change the low beam head lamp on a 2006 grand prix?

To change the high beam indicator you have to take the instrument cluster out of the dash.

To change the low beam headlight on the 2001 Lesabre, the headlight assembly must first be removed from the car. It is really quite simple to do. There are two bolts on the top of the assembly that must be removed - that is all! The entire assembly comes out and gives easy access to the low beam bulb. Give it a 1/4 counterclockwise turn to remove it. Plus in the new one (#9006) and reverse the procedure.

The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.

Yes, changing the direction of a beam of light is precisely what a reflection is.

how do you change it..its an automatic

97 and under are i-beam suspension.

autozone.com has online manuals that give step by step how to

Mounted to the top left side of the steering collumn under the intrument panel.

change the light bulb that does not go on, on low beam, it possible that the wire inside the bulb for low beam is broken


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.