Auto Parts and Repairs
Headlights Tail and Brake Lights
Ford Ranger
Chevy Blazer S-10

How do you change the lowbeam bulb on 1997 Chevy pickup?

474849

Top Answer
User Avatar
Wiki User
Answered
2015-07-15 20:04:42
2015-07-15 20:04:42

Remove the grill. There are 3 or 4 screws along the top and 3 places where it's clipped at the bottom. Then you have 2 bolts holding on the monting plate for the light, remove those and you can access the bulb to replace. Takes about 5 min.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


How is the easiest way to change a fuel pump on my k1500 Chevy pickup

where is the pcm module located on my 1997 Chevy truck

how do you change a fan switch on a 1997 Chevy cavalira

my 1997 Chevy k1500 well run fine and then it trips fuel pump relay

How do you change the water pump on a 1997 chevy malibu?

If they are the same engine, it's highly likely the trans will be the same .

how do you change a ac fan switch on a 1997 Chevy cavalier

Where is the thermostat on a 1997 chevy suburban and how do you change it?

will 225r7015 work on a Chevy pickup rather than a 235r7015 tire

Yes it will fit and set right in place with NO problem. The problem is that the 95 engine is not compatible with the wiring harness, The PCM / Powertrain Control Module/computer on the 1997 model truck. The fuel pump would have to be change too. I could probley name some more things too. You need a VORTEC engine from 1997 to 1999 so you don't have to change are MODIFY anything.

Take it to a gargage and ask for your oil pickup changed

Answer how to find belt diagram 97 Chevydo what i, had to do ,look underhood of another 97 Chevy pickup.

there may be a recall for this - the polarity may be incorrect - call your dealer to see if this vehicle has an outstanding recall

How do I change the clock setting on a 1997 Chevy Lumina with a CD stereo system?

bolt pattern for these model smaller chevy's is 5x4.75

are brake lights staying on or is brake in the dash on ?

Probly under the drivers door on the inside of the frame.

Need to know which actuator you want to change.

Code P1345 is for the crankshaft or camshaft position sensor.

NO it will not work. There is ONLY 2 years that will interchange with the 97 year truck. That is a 1997 and 1996 4L60E transmission.

The cost of labor to change the front shocks on a 1997 Chevy S-10 pickup varies greatly by the place where service is performed. As of 2014 this ranges from 41.50 per shock to 80.00 per shock.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.