Want this question answered?
help
remove the two nuts holding down the battery harness inside the fuse/relay center, then you can pull it out.
The fuse block under the hood needs to be raised. There are four tabs around the perimeter of the block. There are 2 small bolts that hold the fuse in place. Remove the 10mm bolts then simply pull out the fuse and replace it, reinstall the bolts and place the fuse block back in place. There are sliding guides that will align the block.
First, locate the fuse box. Then, once inside the fuse box, locate the 120 amp fuse. Remove it by pulling it straight out. Lastly, place the new one in place of the old one.
brake light fuse 2006 harley softail heritage
The Main fuse is in the fuse box under the hood on the drivers side. It is a 100 amp fuse.
More than likely a short in the wiring.
Mazda main fuse is bolted in with two M10 bolts. I know because I destroyed mine while trying to remove it. You will need a good socket set with a universal joint to remove it.
The CPU for a dome light on a Mazda 626, and most other Mazda vehicles, is located near the main fuse box. This is found under the hood.
Check the battery, cables, starter Check the main fuse.
The main relay is in the fuse panel located under the hood on the driver's (left) side. Original equipment relay is green. Schematic decal is on the inside of the fuse box cover.
i have a 2006 galaxy, and the fuse controlling the electric windows is the number 2 fuse (1st fuse in from the left on the main row of vertical fuses)