If this is the gasket I think it is, it is between the engine block and the oil filter, and has the lower radiator hose attached to it. First remove the air deflector from the underside of the vehicle, and remove the left front tire (unless you are fortunate enough to be working under a lift). You will need to drain the oil and some of the coolant unless you enjoy taking Prestone showers. Remove the oil filter, the adapter is attached to the block with four bolts. Remove those bolts, the gasket comes off with the adapter. Line up the new gasket, install, tighten the bolts, install new oil filter, refill the oil and coolant, reattach anything else you removed, and if you are lucky, you've fixed your leak.
The gasket is between the head and the intake.
I was looking at fordparts.com and it shows a water pump gasket
coolant fan temp sensor 1998 crown victoria
The 1981 Ford Crown Victoria does not have an Oxygen sensor.
How do you change the starter from a 1998 crown Victoria lx? Click on the link in the "Related links" section of this webpage.
15.0 Liters / 15.8 Quarts
The intake may have to be removed to gain access. The valve cover just bolts on. When putting a new gasket on clean all of the old gasket off and try not to scratch the head or valve cover.
Bad head gasket?Cracked block?
Cooling system capacity : ( including heater ) 14.1 quarts / 13.3 liters According to the 1996 Ford Crown Victoria Owner Guide
just change the bulb!
Its in the gas tank.
Follow the Youtube instructions.