put it on a set of ramps and get under it then remove the drain plug from the bottom oil pan let the oil drain out then replace the drain plug remove the oil filter it is located to the right of the oil pan replace with a new oil filter and place 5 quarts of new oil in the engine from the top where the oil cap is it is located on the left of the vehicle under the hood
Its an electrical problem,if your oil is okay.It might be on a recall list.Check with Ford.
It should take about 6 Qt's of Motor Oil. Make sure you also change Oil Filter.
The oil pan is bolted to the bottom of the engine
Check Motor Oil . Or change oil weight, example; if you used 10w30 then used 10w40 and so on.
I own A 1994 Ford Bronco Eddie Bauer with a 5.0 liter engine. The answer to your question is the oil capacity is exactly 6 quarts for an oil change.
( 5 quarts ) with engine oil filter change for the 4.0 liter V6 and 5.0 liter V8
About five quarts.
On a 1996 Ford Explorer : ( if you have the 4.0 liter EFI , V6 engine ) The oil pressure sending unit for the gauge is on the drivers side of the engine , below the power steering pump )
Bolted to the bottom of the engine
It is located on the bottom or side of the oil pan. The oil pan is on the very bottom of the engine.
According to the 1999 Ford Expedition Owner Guide ( 5W-30 ) * with engine oil filter change , 6.0 U.S. quarts of 5W-30 engine oil
it is on the passenger side of the oil pan, kind of hidden behind the cross member