There is no handle, unless you are talking about the release handle.
The 66 had a pedal.
65 had a handle.
In either case it is best to purchase a new unit, it will come complete with brackets, just unbolt the old one and put the new one in.
On the center console near the parking brake handle
On most cars with a foot pedal parking brake, there is a handle usually just above it that you pull to release the brake.
The parking brake light comes on when you engage the parking brake. Pull the parking brake release handle. ------------------------------------------------------------------------------- the brake light also comes on if the brake fluid level in the brake master cylinder is low ( in your engine compartment )
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
On the newer vehicles, you push the parking brake down to release the parking brake. Older vehicles have a release handle on the lower left side of the dashboard.
Depress the button on the parking brake handle and move the lever down
If the parking brake isn't on , check the brake fluid level in the brake master cylinder in the engine compartment and see if it is low
It releases automatically when you shift out of park. If you have to do it manually under the parking brake is a silver handle that releases it.
First make sure service brakes are adjusted properly Adjusting bolt will either be at the junction of the 3 cables under the vehicle or at the handle of the emergency brake - make have to move the plastic trim
First, push the clutch/brake pedal all the way in (forward) with your left foot. Then, while holding that pedal in, lift the small handle (the parking brake) on the right side of the engine housing (just above the right foot rest area) with your right hand. While holding the small handle all the way up, release the clutch/brake pedal. The pedal will move back only a short distance and stay there. The parking brake is set. To release the parking brake, just push the clutch/brake pedal forward and the small parking brake handle will fall down, releasing the parking brake. By PhilfromPA
If your brake light is on , either the parking brake is on or the BRAKE FLUID LEVEL in the brake master cylinder in your engine compartment IS LOW
If it doesn't have a release handle, you step down on the parking brake pedal one more time to release it.