Pull out the upper control arms after putting the lower ones on jack stands in order to hold the springs in place with the car weight. Then you need to pull the hood in order to gain access to the upper a/c and radiator mounts.Drain the radiator by pulling the plug on the bottom of the right tank. Once this is completed then pull the trans cooler(if you have an automatic) and radiator hoses. Now you can pull the radiator up and out in order to change the mounts
Drain the water from your 1972 Chevy Corvette radiator. Remove the radiator hoses. Remove the stabilizing arm retaining bolt. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
== ==
Remove the bottom hose from your 1995 Chevy Corvette radiator. Allow the coolant to drain out. Put a hose into the top of the radiator. Run water through the radiator until it runs clear.
how to change a fuel pump in a 1998 Chevy Corvette
== ==
== ==
== ==
Get the motor mounts, trans mounts, transmission, radiator from a 1976 Malibu or Monte Carlo and swap them in.
to make sure the temperature of the fluid in the radiator is cool enough
== ==
Yes. You will need to change the motor mounts and do some exhaust work and install a bigger radiator. But a direct bolt in NO.
The Chevy Corvette was named for the corvette, a small fighting frigate. Mako shark