Remove wheels
Remove caliper mounting bolts
Slide caliper off rotor
Rotor should slide off hub
Use a "c" clamp rto fully retract piston into caliper body
Replace rotor
Replace inner and outer pads
Replace caliper
PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
HOW DO YOU CHANGE FRONT WHEEL STUDS ON A 1995 CHEVY LUMINA AUTOMOBILE?
front
they are 5.25
replace a windshield wiper switch on a 1995 chevy lumina van
What is the cost of a front end alinement.
The oil pump is found on the bottom on the 1995 Chevy Lumina's engine. It is mounted on the front of the crankshaft
The oil drain plug on the 1995 Lumina 3.1 is located under the front of the vehicle at the rear of the oil pan. It can be reached easily if the car is lifted so that the front end is off of the ground.
front brakes are pads. they are pretty easy you will need a c clamp a size 15 metric socket a 3/4 in drive or a 1/2 in drive.. loosen the calipers drivers side is reverse thread so you will have to pull up to loosen these bolts. passenger side is push down to loosen. thats how you change the pads once you get the old pads off you will need to pay attention to how they are put on pretty self explainatory with this... there are brakets behind the caliper that holds on your rotors to do this you will need another socket loosen up those brackets and slide the old rotors off through the studs that hold your wheel on. throw the old rotors in a pile of scrap or something and put your new rotors on..
no it is not possible
it is a long and detailed process, look it up on youtube.
Since the Lumina, Silhouette, and Trans Sport are the same base vehicle, see this How To: http://wiki.answers.com/Q/How_to_change_heater_core_in_1995_Oldsmobile_Silhouette
Chevy Lumina has not the carborator.