No need to remove the engine mount. You are able to remove the right. front lower motor mount bolt and sleeve though the wheel well. Just turn the wheels far to the right, remove belt from alternator with tensioner, remove the plastic inner cover in the wheel well and use two long extensions on a breaker bar to remove the lower bolt only on the motor mount. Pull the bolt out and remove the sleeve next to the engine. With the sleeve removed you can install and route the new belt. Reinstall sleeve and bolt.
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
there is no difference between the 2..to be sure when u go to the parts store have him check it out..
locate blend door actuator for 1997 pontiac bonneville se
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
your back end
The rotor thickness for your 1997 Pontiac Bonneville is 0.75. When the rotor falls below this thickness a certified mechanic can no longer use the rotor.
A person can find a wiring diagram for a 1997 Pontiac Bonneville at most GM dealerships. The dealerships are happy to help customers with any requests.
The Autolite website lists a gap size of .060 the 1997 Pontiac Bonneville.
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
go to www.kellybluebook.com and it will tell you the value
http://www.autorepairmanuals.biz/
The 1997 Pontiac Bonneville has a coolant capacity of 5.6 gallons. The manufacturer recommends that 50 percent of your coolant should be anti-freeze.