It's pretty easy top cahnge a serpentine belt. There is a belt tensioner on the front of the engine. It should have a square hole in it for a 1/2 inch ratchet or breakover bar. using one of those tools, pull back on the spring loaded tensioner and you will get slack in the belt. Slip it off and replace it.
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
You probably have a bad serpentine belt and tensioner.
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
The belt is bad if it has 3 cracks per square inch.
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
How do you route the serpentine belt for a 1998 w
You firts pull out the battery, and then you slip out the starter cables, and right where the belts are you snap those and that's where the serpentine belt should be changed.
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
In the belt book at most autoparts stores have a diagram section for serpentine belt routing.
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
The 1999 Chevrolet Silverado serpentine belt assembly diagram can be obtained from most Chevrolet dealerships. The diagram is usually provided when you purchase the serpentine belt.