First you have to remove the plastic around the steering column, two bolts hold on the lower plastic and two screws hold on the upper plastic from under the steering column once the plastic is removed you can access the three bolts holding the shifter assembly in place. You must first remove the transmission linkage As well as the selector linkage in order to get it free
It's a sealed unit with the hub. You have to replace the whole hub assembly.
how to repace the distributor on an 98 chevy silverado
how do you change the knock sensor in a 2003 Chevy silverado 5.3
how do you change the air condition controller in a 2004 chevy silverado
That would be the shifter cable.
There is no cabin filter on a 1989 Chevy Silverado.
Press the tow/haul button at the end of the shifter. 2000 Chevy Silverado LT Ext Cab 4 dr 5.3L 4x4 Z71
This problem is not a new one. By the way, if you're having the key stuck issue, or if the shifter moves without pushing anything, buy a new shifter assembly. Official TSB and Recall Thread - Page 14 - Chevy HHR Network (Use the link below.)
How do you change the ignition control module in a 1988 Chevy Silverado 5.7L
no
there is two rods that go through the housing from the top. turn them to unlock and pull up and out then the whole assembly comes out and you can change the bulbs.
how do i change the spark plugs on a Chevy silverado 1500