You have to remove the headlamp assembly, this is easy to remove but difficult to install also your headlight alignment may be out after. First remove the plastic cover on the top of the headlamps in front, it extends across the top of the front engine compartment and covers both headlamps. Remove the plastic tabs which hold it in place, be careful they break easily. After removing the cover locate 2 metal L-brackets, located at the rear of the headlamp. The L-brackets are located on the left and right rear of the headlamp. Pull the tabs towards the engine and up, there is a notch on the L-bracket which holds it down. After puling both L-brackets out the headlamp assembly can be removed. To install is the a problem, you can loosen the headlamp alignment screw and this will make it easier to re-insert the L-Bracket, but you will need to re-align the assembly. Be careful because the plastic mounts on the headlamp break easily with pressure and are difficult to align back in. If the alignment screws are not moved then you have to force the assembly back into place and re-insert the L-Bracket. Conclusion- if you're not mechanical don't do it. Second the Pontiac Mechanical engineer who deigned this clearly has a relative in the parts department because the plastic headlamp assemblies break easily.
cant be done
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
underneith the front bumber twist counter clockwise replace bulb
how do you change a rear turn signal bulb on a 2010 buick lucerne
Change the turn signal switch in the steering column, or the turn signal relay.
To change the turn signal bulb on a 2003 Ford Focus SE, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Make sure the new bulb is securely in place before testing the turn signal.
To change the rear turn signal bulb on a Pontiac Grand Prix, first, open the trunk and locate the taillight assembly. Remove the screws or clips holding the assembly in place, then carefully pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the taillight by reversing the steps. Make sure to test the turn signal to ensure it’s working properly.
See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.
To change the rear turn signal on a 2001 Pontiac Grand Prix, first, open the trunk and locate the access panel on the side where the bulb is located. Remove the panel by unscrewing or unclipping it, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring it is securely in place, and then reassemble the access panel. Finally, test the turn signal to ensure it is working properly.
IF, the bulb doesnt light up at all than it is the turn signal balb but if the turn signal is flashing quickly, but still lights up like it should than it is quite possibly the turn signal phuse. And you need to check the phuse instead of thte bulb.
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
how do i change driver side turn signal bulb on 1992 dodge caravan?