answersLogoWhite

0


Best Answer

I just finished changing my plugs. Although it was a little tedious it is not that hard to do. You will need a #10 metric socket and a spark plug socket with a rubber boot inside to help bring the plug out. There are a couple of brackets that require the #10 socket to remove on the drivers side in order to get at the plugs on that side. You will also need a long extension for you socket. On the passenger side you will need to loosen the air intake hose from the air filter to the top of the motor and you will need to remove a couple of vacuum hoses. After that is out of the way you can get at the plugs on that side. The plugs on that side are under the little black boxes that are sitting where the plug wires are attached. You won't need to remove the plug wires but you will need to remove the black boxes. First remove the small electrical connector on the top of the box by squeezing and pulling up. You can then remove the box with the #10 socket and pull the spark plug connector staight out. After changing the plugs just reverse the process to replace everything you have removed. It took me about one hour. Good luck.

User Avatar

Wiki User

โˆ™ 2007-01-12 05:35:04
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you change the spark plugs in a 1998 Toyota Tacoma?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions
People also asked