How do I change th starter on a 1994 Plymouth sundance
No, it is not an interference engine.
Remove the tire and wheel from your 1994 Plymouth Sundance. Remove the brake assembly spring. The brake pads will come off. Reverse the process to install the new brakes.
The codes on a 1994 Sundance are 2 digit codes. Code 3 is not correct.
I have a 94 Plymouth sundance duster. I am sure the location is the same. It should be right behind your oil filter underneath the engine. If you jack the front end up and slide underneath, you should see it behind the oil filer. If yo have the six cylinder the above is true. If you have a four cylinder the starter is under the manifolds on the rear of the engine.
in the fuse box
You can purchase a dipstick from the dealer.
It is screwed into the exhaust manifold on the rear of the engine.
A 1994 Plymouth Sundance/Duster does not use a speedometer cable. Instead, it uses a Speed Sensor located on the transmission.
To change a headlight on a 1994 Plymouth Sundance, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws securing the headlight, then carefully pull the assembly out. Disconnect the wiring harness from the back of the headlight bulb, replace the bulb with a new one, and reconnect the wiring. Finally, reinsert the headlight assembly and secure it with the clips or screws.
Front camber is adjusted at the strut to knuckle bolts.
passenger side rear next to fuel tank
how do you change rear wheel bearing in 1994 Plymouth acclaim