Remove the tire and wheel from your 1994 Plymouth Sundance. Remove the brake assembly spring. The brake pads will come off. Reverse the process to install the new brakes.
The codes on a 1994 Sundance are 2 digit codes. Code 3 is not correct.
You can purchase a dipstick from the dealer.
it sounds like to me that your master cylinder might be bad
I have a 94 Plymouth sundance duster. I am sure the location is the same. It should be right behind your oil filter underneath the engine. If you jack the front end up and slide underneath, you should see it behind the oil filer. If yo have the six cylinder the above is true. If you have a four cylinder the starter is under the manifolds on the rear of the engine.
just follow the hose off the radiator that goes into your engine block. its on the front of the motor. you just loosen the 2 bolts that hold the hose on and its right there. very simple
How do I change th starter on a 1994 Plymouth sundance
get a manual on your car from DISCOUNTAUTOREPAIRMANUALS.COM
Front camber is adjusted at the strut to knuckle bolts.
under the altnator (bottom front of the passenger side).
I need a daigram of the rear brakes being changed
If you doing front disc brakes it's really easy i first did them when i was 16. heres a very detailed site with great pictures. http://www.2carpros.com/how_to/how_to_replace_brakes.htm
how to change the brakes
How do you change front tire studs on a 1994 Seville sts
ur hamster i eated it
front disc, rear drum.
Yes , on the back wheels ( disc brakes on the front )
The codes on a 1994 Sundance are 2 digit codes. Code 3 is not correct.