do u remove the 2 long bolts running down the side of the starter or the 2 larger bolts on the end near the transmission?
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
To change the starter on a 1998 s10, the motor mount will have to be removed. Support the motor on a jack with a board on the top of it, and remove the mount to get to the starter.
the starter relay.
The starter solenoid is attached to the starter.
It is attached to the starter.
The starter solenoid is located on the starter. It would be more cost-effective to have the entire starter replaced with a good remanufactured unit on this application.
Disconnect the battery cable. Remove the bolts that hold the starter in place. Disconnect the wires. Instahlation is in reverse.
It is mounted on the starter motor itself. When you get another starter, it will have the solenoid mounted on it already. If it is bad, just replace the starter, I would not change just the solenoid.
How much torque do I use to tighten the idler arm
YES.
The starter solenoid is attached to the starter.
how to change front shocks in 01 Chevy s10