you must first remove the intake system but before you start anything, disconnect the battery. Second remove the battery and battery tray ( this makes it easier to access the top bolt. You will then be able to see the the top bolt for the starter (12mm socket) located next to a transmission bolt. Do not remove it just yet, you must first release the 3 bolts under.
Now jack the car up, make sure its secure and wont cause any injuries, once secure, proceed to move under the car. Once under, look to where you the oil filter, left to it, you should see the starter. There are 3 bolts (all 12mm) remove all the bolts and disconnect the electrical connection.
Now proceed back to the top and remove the bolt thats accesible from the top of engine bay. Now go back under the car and wiggle the starter out. you Might have to maneuver a certain way but it'll come out
Hi, starter is behind engine under the intake
Yes they will fit. There is not a difference in part number for a protege or protege5.
Where is the igniyion coil on a2002 mazda protege
Mazda recommends that the belt be replaced every 105k.
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
It is located right behind the ignition. It is important that this part is working correctly so that your car will start.
in your face :)
no it will not fit.it is not the same lenght and the same height
The pulse generator on a 2002 Mazda Protege is located on the top of the transmission. The pulse generator can be purchased at any auto parts store such as NAPA.
does a 2002 mazda protege have a front wheel drive
For a 2002 Mazda Protege 5, the recommended oil is a 10w 30. 5w30 is recommended in temps below 30 degrees f.
I just replaced my fan belts on a 2002 Mazda Protege. It came out to a little over $200. I took my car to a Mazda dealership.