ok soooo..... first u take all of the plastic trim off the top of the light. there should be a black plastic piece that covers the top of the light after u open ur trunk. and also the gray plastic piece that goes across the trunk latch should come off. after u got that off, unscrew the two phillips style screws from the top of the light assembly. on the inside of the trunk, peel back the carpet liner. it should be held by plastic pins which come right out. once u get the carpet liner off, on the inside of the trunk, there should be two black plastic clips where the fender is. pinch those clips while sliding the actual tail light out away from the fender like a sliding door. it should come out about a half inch. from there u just pull directly out towards the bumper. it may feel like ur gonna break it but it wont break. just make sure u have a hold of the solid pieces of the tail light. DONT grab any weak plastic or something may break. ur tail light should com out. THERE U GO!!!!! it took me about an hour to actually realize what to do. this should shorten ur time
how the sequence of spark plugs goes on the engine of 1990 Toyota cressida
tail light fuse Toyota86 Cressida
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
Are you sure of the engine size? Should be 7mge inline six cyl. 22r wasn't offered in a 1990 cressida.
Its under the intake manifold/plenum towards the rear of the engine
how to reset oil timing on 1990 toyota
you can go in behind the light through the bed liner, or remove the taillight cover
Buy a kit at Wal-Mart or auto parts comes with instructions Probably will have to be converted from R-12 to R-134
To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.
before the 1987 change 1988 to 1990 change 1995 to 1998
take it to the crusher
I paid $500 to get it replace.