Lift the tailgate. You will see two screws holding the tailights in. Remove the screws and carefully pull the entire tail light assembly off the car. The bulb holders loosen with about a qaurter turn to the left. Remove the bulb with a Quarter turn to the left. and replace it. Notice on the metal section of the bulb there are two nipples one on each side. One is higher than the other and must be put in correctly for the bulb to screw in.
Also note that on some Chryslers they use a plastic poppet instead of a screw. The center of it can be pryed up about 1/4 to 3/8 inch and the whole poppet can then be removed.
The 2009 Chrysler Town-AND-Country has 12 valves.
The 2009 Chrysler Town-AND-Country has a V6 engine.
The 2009 Chrysler Town-AND-Country has overhead valves (OHV).
The 2009 Chrysler Town-AND-Country is a gas-powered vehicle.
The 2009 Chrysler Town-AND-Country has a 4-speed automatic.
The 2009 Chrysler Town-AND-Country is 16 ft. 10.5 in. (202.5 in.) long.
The 2009 Chrysler Town-AND-Country has a 18.7 degrees angle of departure.
The maximum payload of the 2009 Chrysler Town-AND-Country is 1200 lbs..
The 2009 Chrysler Town-AND-Country's turning circle is 38.0 ft..
The 2009 Chrysler Town-AND-Country runs on regular unleaded.
The 2009 Chrysler Town-AND-Country has a 14.3 degrees angle of approach.
The curb weight of the 2009 Chrysler Town-AND-Country is 4335 lbs..