remove bolts, remove housing remove and replace gasket, then housing, insert thermostat, re attach hose, check fluid level, fill as necessary. but if you have to ask, tou might want to take it to a professional
You must 1st pull of air intake from air box to intake. Should be flat head screwdriver and 2 hoses plus 2 plugs close to air filter
next there are dual Plastic ports on both sides of engine 10 m undo these
You should be able to undo all claped hoses to water outlet
kinda push them aside...do not lose clamps
Carefully undo short hoses from tubes to water outlet.
there are 3 bolts holding thermostat housing 8 m
be careful as they have inserts crankm too hard they strip and you will be ordering them as advance auto parts doesn't sell them
pop out thermostat, pop in new and reverse steps..
All of these components are plastic abd brittle if aged be careful.
Water outlet $83.00 Ford Dealer part only
Thermostat cover $37.oo
good luck
follow top radiator hose to the engine/intake, it will be right there.
Where is the thermostat on a 2001 Lincoln LS?
2000 ls
How do you change the lamp on the license plate of a lincoln ls 2000?
Where the upper radiator hose connects to the engine you will find the thermostat housing.
There is a thermostat on all cars.
what are the specs for a 3.9l long block Lincoln ls 2000 model
Is there two power steering pump on a 2000 Lincoln LS
According to the 2000 Lincoln LS Owner Guide : With engine oil filter change : The 3.0 liter V6 engine takes ( 6.7 U.S. quarts )
( # 32 ) is a 20 amp fuse for the cigarette lighter on a 2000 Lincoln LS
Remove the water supply hose from the top of your 2000 Mercury Villager thermostat housing. Remove the thermostat housing retaining bolts. The old thermostat will simply lifts out. Drop in the new thermostat and reverse the process.
Does not have one
On a 2000 Lincoln LS : In the front passenger footwell : ( # 32 is a 20 amp fuse for the cigarette lighter )