Thermostat Replacement
Removal Procedure
1. Remove the air cleaner and duct assembly.
2. Drain the coolant until the coolant level is below the thermostat.
3. Remove the crossover exhaust pipe.
4. Remove the radiator hose from the thermostat housing.
5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.
6. Remove the thermostat housing and gasket.
7. Remove the thermostat.
8. Clean the mating surfaces.
Installation Procedure
1. Install the thermostat.
2. Install the thermostat housing and gasket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the thermostat housing bolts. Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Install the radiator hose to the thermostat housing.
5. Install the crossover exhaust pipe.
6. Install the air cleaner and duct assembly.
7. Fill the cooling system.
how do i change starter on buick 2002 rendezvous
How much can cost repair to change head gasket Buick Rendezvous 2002
how to replace starter for a 2002 buick rendezvous
Yes
2002 buick rendezvous ambiant temperature sensor location
will the dash lights work if we use a bcm out of a different 2002 buick rendezvousand put it in my 2002 buick rendezvous
WHAT is the easiest way to change the oil pan
The 2002 Buick Rendezvous has a 3.4 V6. Firing order is 1-6-5-4-3-2.
How do you remove steering pump on a 2002 Buick rendezvous 3.4L?
YES A Rendezvous does has a shock and a strut on the rear.
5W-30
my 2002 has 10 liters