disconnect the battery and remove the alternator, remove the air con compressor (if fitted), remove the 2 pipes fitted to the housing of the thermostat and let the anti freeze drain into a container, undo the 4 bolts for the thermostat housing and remove the thermostat, clean the sealing area and fit in reverse order and bleed the antifreeze when filled up
No
Replace {Thermostat}, It is in a closed posistion and is unable to open. Another cause as with the Futura (1.3 Fiesta year 2000) is a valve between the heater and engine, the Thermostat shows normal operating therefore replacement is not needed.
if you mean the 1.3 endura engine no and if you mean the 1.25 zetec i think it only came with a fuel shut off swich
You must be referring to a European Ford as the Fiesta is no longer sold in the U.S. Gates has no listing for a 2000 Fiesta. All 2000 Fords with a belt that are listed require the belt to be changed at 120,000 miles. The Focus engine is an interferance engine, and if the belt breaks engine damage will occur. I suggest you call a Ford dealer to make sure on your Fiesta.
do i need to change the manifold when replacing thermostat
they are a chain not a belt!!!!!!!!!!!!!
well each radio has a different code u dick. otherwise itd be pointless
If it is a 1.25 Zetec engine then the oil must be 5w 30 If it is an Endura engine 5w 40. Hope that helps!
where is thermostat in 2000 chrysler grand voyager ??
1.8 2000 zetec? i dont think they make that engine even for the 2000
Where is the temp sensor on 2000 ford focus zetec engine
There are a few guidelines that will help you to change a thermostat in a 2000 Silverdo. Remove the clamp and detach the hose on the thermostat and then remove the bolts that hold the thermostat to the manifold and replace it with the new one and screw back the bolts and the clamp.?æ