Setting the Time
Press and hold the HR or MN buttons for two seconds.
The clock symbol will appear on the display. Then
press and hold HR until the correct hour appears on the
display. AM or PM will appear for morning or evening
hours. Press and hold MN until the correct minute
appears on the display. The time can be set with the
ignition on or off.
To synchronize the time with an FM station broadcasting
Radio Data System (RDS) information, press and
hold HR and MN at the same time for two seconds until
UPDATED and the clock symbol appear on the
display. If the time is not available from the station, NO
UPDAT will appear on the display.
RDS time is broadcast once a minute. After tuning to an
RDS broadcast station, it may take a few minutes for
the time to update.
two orange cables
what are the radio color codes for a2009 chevy impala
To hook up a radio in a 2001 chevy impala do i need the charm or can it be direct wired
yes
You will still see the messages on the dashboard message screen but you will not be able to fix them with the radio anymore. the factory radio is not vital but it is helpful to refresh some message board codes. most of the messages can still be fixed without the factory radio.
yes! run it to the trunk
Installing a CB radio in a Chevy Impala begins which installing the mount and location a suitable power source. The radio is then mounted to the dash, wired up, and the antenna connected.
The radio on a 2003 Chevy Impala can be typically be fixed by replacing the fuse. If the radio does not work when powered, it will need to be replaced with a new unit.
Under the hood beside the battier
no
Begin by removing the decorative cover from your 1990 Chevy Caprice factory radio. Remove the radio retaining screws. Remove the wiring harness and the antenna cable from the back of the radio.
A 2002 Chevy Impala does not come with an RCA jack. A jack can be added to the radio via an adapter.