Trim the wheel behind the studs
How do you change front tire studs on a 1994 Seville sts
35...It states that on the tire.
a nokian tire is 130 and a winterfores is 100
tAake the freakin tire off and put another one
remove tire un bolt and hold the caliper out of the way the rotor just slides on the studs
185/65/r14 h
The tire on a Jeep Liberty is changed by loosening the lug nuts, jacking up the vehicle, removing the lug nuts, and taking the tire off. A replacement tire or spare is then place over the wheel studs and the lug nuts tightened down.
They are metal Pins that are stamped into a tire and they help you get more grip on snow and ice. :D
No, they are made to come out when ice goes.
Changing a tire on a 2001 Toyota Solara is very easy to do. You will first need to jack the car up, then take a tire iron and take the lug nuts off the tire. After you have removed all of the lug nuts, you will then put the new tire on and put the lug nuts on and tighten them.
REAL EASY STUFF JACK THE TRUCK UP USE A GOOD SET OF JACK STANDS UNDER IT TO SECURE IT ..REMOVE THE REAR WHEELS ...SPRAY WD-40 AROUND THE WHEEL STUDS AND THE AXEL HOLE ....GET A LARGE HAMMER AND SMACK THE DRUM UNTILL IT BECOME LOOSE .THEN USE BOTH HANDS AND PULL IT OFF. DO NOT HIT THE STUDS WITH A HAMMER !!! SLIDE ON THE NEW DRUM PUT THE TIRE BACK ON .
In general, you can't stud ANY used tire. The manufacturers provide small holes for tire studs and once a tire is driven even a few miles, those holes fill up with grit and road debris. It will be almost impossible to find a tire store that's willing to stud a used tire, since the process will involve digging out whatever has built up inside those stud holes. I also wouldn't trust the studs to stay in the tire if someone DID dig out the debris.