The sensor will either screw in or have a bolt holding it. Disconnect the wiring plug then unscrew or remove the bolt to change.
depends on if it is the input sensor (mounted in the transmission) or the output (on the passenger side transaxle)
There is no Cable it is a speed sensor on the transmission
It's mounted to the top of the transmission at the back. It has a two wire connector and is heal on by one screw.
The speed sensor is mounted at the top of the transmission towards the rear. It has a two wire connector and one mounting screw.
Its mounted on the transmission.
The sensor on the 1994 Chevy Caprice is located on the transmission. it is mounted on the tail shaft of the transmission.
The crank sensor is mounted on the top of the transmission bell housing.
The transmission range sensor is mounted on the drivers side of the transmission. It is bolted around the shifter shaft as it comes out of the transmission.
on the transmission
The crank position sensor is mounted on transmission bell housing in the front.
On the transmission.
It is mounted to the rear of the throttle body.