If you don't know what you are doing take it to a mechanic !!! the bar that runs across the front of the motor holding the headlights in position and the bumper attaches to it needs to be removed. the electric fans have to be taken out and possibly the radiator ( makes it easier to move around ). then you need to remove the harmonic balancer ( special tool ). then remove the plate around the front of the engine to expose the timing belt. there is a spring loaded tensior that needs to be removed ( slowly compress it in a vice and insert an Allen wrench through the hole to keep it compressed ). after removing the time belt ensure all timing marks line up. you should also replace the water pump at this time due to it being run by the timing belt and you already have it apart. installation is reverse of removal.
On the 2000 Chrysler concorde its under the steering column
Change it every 100,000 miles.
5w30
3800 lbs apprx.
The 3.8L in a Chrysler Town and Country does not have a belt, it has a timing chain that does not require service.The 3.8L in a Chrysler Town and Country does not have a belt, it has a timing chain that does not require service.
It has a timing belt.
In order to change the timing belt in your PT Cruiser you will need the new tensioner and timing belt covers. Your dealership should have the parts you need
0.048 TO 0.053
No.
105 Ft. lbs.
about 3 hours if you know what you are doing
It is bolted in place and does not fold down.