you take off carb or tbi and the take off all braces from intake. take out distributor and coil(you will need them later) and then take all the fastener bolts of and replace intake. put all of the things back on
Under the upper intake assembly
Assuming this is a 4.3L engine, the upper intake manifold gasket would be between the upper intake manifold and the lower intake manifold.
there is no upper intake gasket, only a front and rear
how do i remove the upper intake manifold on a 97 chevy cavalier 2.2l v4
On the 4.3 engine it is located under the upper intake manifold. The upper intake manifold must be removed to gain access to it.
Under the upper intake assembly
It took 4.3 hours
Assuming this is a 4.3L engine, the fuel pressure regulator is located under the upper intake manifold. The upper intake manifold must be removed to gain access to the regulator.
you have to remove the whole upper intake. i hate the 3.4 engine.
It is between the upper and lower intake manifold. The gasket is an o-ring type.
The thermostat on a 1999 Chevy Malibu 2.4L is located on top of the engine, in the intake manifold. It is within its own housing which is connected to the upper radiator hose.
If your engine is a 4.3L V-6 with CPI (central point injection) it is inside the upper intake manifold. The upper intake manifold is bolted on top of the normal intake manifold. The throttle body is mounted on it and your fuel lines terminate into the center of this.