This is the USA we don't have mk5 escorts.
Sounds like wishbone bushes have gone, same thing happened to my escort had to fit a new wishbone there was movement in the bottom ball joint
yes
front windscreen is a standard escort from mk5 up they make a clear / green / toptint also.
To change the bonnet release cable on a Ford Escort MK5, first, open the bonnet and locate the cable's connection to the latch mechanism. Disconnect the old cable from the latch by unbolting or unclipping it. Next, remove the interior release handle by unscrewing it, and then pull the old cable out from the passenger compartment. Finally, install the new cable by reversing the process, ensuring it is securely connected at both the latch and the release handle.
The torque setting for the lower wishbone on a Mk5 Ford Fiesta is typically around 100 Nm (Newton-meters) for the mounting bolts. It's important to refer to the specific service manual or repair guide for your vehicle model and year, as torque specifications can vary. Always ensure to use a calibrated torque wrench for accuracy when performing the installation.
The racks are completely different. The cosworth one is almost, if not the same as a Sierra rack. Hope this helps.
http://golfgtiguides.co.uk/guides/remove-mk5-wing-mirror-and-change-indicator/ see the above site...
the mk5 mk6 mk7 diesel van standard fuel tank is 60 ltrs
yes
I'm guessing that he just removed or re-routed the spark plug wires.
Well you can turn it 90 digree angle
To change a wishbone on a vehicle, first lift the car securely and remove the wheel for access. Disconnect the suspension components attached to the wishbone, such as the ball joint and any bolts securing it to the chassis. Replace the old wishbone with the new one, reattach all components, and ensure everything is tightened to manufacturer specifications. Finally, reinstall the wheel and lower the vehicle, checking for proper alignment and operation.