0
What else can I help you with?
What is the torque setting for the lower ball joint on a Oldsmobile 88?
What year is the oldsmobile?, and do you need the torque setting for the nut?.
What are the 1993 Tercel front axle torque setting?
The hub nut is 137 ft lbs......... The two lower bolts and nuts that the strut mounts to wheel assembly is 167ft lbs......... Dont over torque that hub nut you will have problems.......................
How do you change lower ball joint on a nissan primera 99?
If you mean the lower suspension arm (wishbone) ball joint, it is fixed into the arm. This means you need to replace the whole lower arm.
How do you drain the cooling system on a 1997 ford fiesta to put antifreeze in?
The most effective way to drain a fiesta is to remove the lower radiator hose at the radiator end
What is the relationship between the torque of a pendulum and its oscillation frequency?
The relationship between the torque of a pendulum and its oscillation frequency is that the torque affects the period of the pendulum, which in turn influences the oscillation frequency. A higher torque will result in a shorter period and a higher oscillation frequency, while a lower torque will lead to a longer period and a lower oscillation frequency.
If you add a 6 ext to your torque wrench do you have to change the torque setting?
as long as the extension is perpendicular to te wrench it will not affect the torque. if your extension makes your torue wrench longer or shorter this will give you more leverage and will give you less torque than desired more leverage vice versa if extension is lower than socket drive. if its sticking straight out you will be fine as long as the extension is perpendicular to te wrench it will not affect the torque. if your extension makes your torue wrench longer or shorter this will give you more leverage and will give you less torque than desired more leverage vice versa if extension is lower than socket drive. if its sticking straight out you will be fine
How can you lower the revs on a Fiesta?
check for vaccume leaks. this can sometimes be hard to do so take you time.
What is the torque on intake of 1997 34?
torque specs are lower intake 115in-ibs upper intake 18ft-lbs
What is the torque specification for the lower ball joint on a 2001 Honda accord dx?
The 2001 Honda Accord lower ball joint torque specification is 90 pounds. The lower ball joint should be torqued in 45 pound intervals.
How does the torque of a vehicle change when using lower gears?
When using lower gears in a vehicle, the torque increases, which means the engine can provide more power to the wheels for better acceleration and climbing ability.
What is the torquing specs for the bolts on a 1999 blazer 43 intake manifold The book gives 132 pounds but this seems too much?
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
What is faster lower or higher turn RC motors?
Lower turns faster,,,higher turns more torque
