0
What else can I help you with?
What is the torque specification for the lower ball joint on a 2001 Honda accord dx?
The 2001 Honda Accord lower ball joint torque specification is 90 pounds. The lower ball joint should be torqued in 45 pound intervals.
How do you replace a lower ball joint on a bravada?
You will need to remove the tire and wheel from your Oldsmobile. Remove the retaining not on top of the ball joint. Pound the ball joint out. Reverse the process to install your new lower ball joint.
What is the torque of the loxer ball joint nuts?
The torque specification for the lower ball joint nuts typically ranges from 70 to 90 foot-pounds, but it can vary depending on the specific vehicle make and model. It's essential to refer to the manufacturer's service manual for the exact torque value and any specific procedures for installation. Proper torque is crucial to ensure safety and performance, as under-tightening can lead to joint failure, while over-tightening can damage components. Always use a calibrated torque wrench for accurate measurements.
How do you replace a lower ball joint on a 99 Pathfinder 4wd?
First you need to jack the vehicle up and support it on stands, then remove the tire. Remove the torsion bar and disconnect the lower shock mount, and remove the stabilizer bar connecting rod from the lower link. Loosen the lower ball joint nut, and use a ball joint separator to separate the ball joint from the lower link, then disconnect the tension rod from the lower link. Remove the front lower link pivot nut and push the stud out, then remove the torque arm from the frame. Remove the ball joint by removing the retaining bolts and install the new one, I suggest you replace the bushing as well.
How do you replace axles 1991 Honda Accord AT?
Support vehicle properly on jack stands. Remove both front wheels. Remove lower ball joint nut and cotter pin. Remove axle nut (36MM). Seperate lower ball joint carefully. Pull axle from housing and from transmission. Reassemble in reverse order. Torque Axle nut to 105 ft./lbs Install new cotter pin in lower ball joint after tightening nut. Torque wheels to 80 ft.lbs. Drive away a happy Honda owner.
What is your lower leg joint called?
If your referring to the knee joint it is the tibiofemoral joint.
What are the 1993 Tercel front axle torque setting?
The hub nut is 137 ft lbs......... The two lower bolts and nuts that the strut mounts to wheel assembly is 167ft lbs......... Dont over torque that hub nut you will have problems.......................
What is the name of the most distal joint of the lower extremity?
The distal interphalangeal joints are the most distal joints of the lower extremities.
What happens if your Oldsmobile silhouette has the lower intake crack?
replace lower intake
What are the joins on a clarinet?
I think you met joints, and the joints are the upper joint and the lower joint. The order of clarinet peices from the top is mouthpiece, barrel, upper joint, lower joint, bell.
Is universal joint a lower pair joint?
Yes, a universal joint is a type of lower pair joint that allows for rotational motion between two shafts that are not in line with each other.
How do you replace a ball joint for 1997 dodge van b3500?
For the lower ball joint, remove the lower control arm and the ball joint seal. Press the ball joint from the control arm. Press the new ball joint into the lower control arm ensuring it is fully seated, install a new seal and the lower control arm.
