For the lower ball joint, remove the lower control arm and the ball joint seal. Press the ball joint from the control arm. Press the new ball joint into the lower control arm ensuring it is fully seated, install a new seal and the lower control arm.
How much should it cost to replace the airbags on a 1997 dodge stratus?
To replace a CV joint on a 1997 Dodge Stratus, start by safely lifting the vehicle and removing the wheel. Disconnect the brake caliper, rotor, and any other components obstructing access to the axle. Remove the axle nut and use a puller if necessary to detach the axle from the hub. Finally, slide the CV joint out of the transmission or differential, install the new joint, and reassemble all components in reverse order, ensuring everything is securely tightened.
On a 1997 Dodge B3500 Maxi Van, the horn relay is typically located in the power distribution center (PDC) under the hood. The PDC is usually found near the battery, and it contains various relays and fuses for the vehicle's electrical systems. You can identify the horn relay by consulting the diagram on the cover of the PDC, which will indicate its specific location.
the big one. Go to Advance Auto Parts or Autozone and rent their ball joint press kit. It'll have a socket. You'll need a 3/4" drive socket wrench (Or a 1/2" to 3/4" adapter) and a long pole to slip over the handle.
== ==
Replace if failed.
How to replace or change the 1997 Dodge Caravan 3.3 liter engine
how to replace the fuel pression regulator for a dodge ram 2500 1997 van.
Inner or outer?
I bought a 1997 dodge ram 1500 larmie and the seller lost the keyless enrty. who do i get a new keyless entry? will i have to reprogram/replace anything on the truck
Do you need any special tools.
You replace the torque converter.You replace the torque converter.