There is a single green plug under the hood on the passenger side of the engine, in the back next to the firewall, (there is also a 5 wire plug next to it, dont mess with that) take a wire with a spade connection and plug it into the single green connector and ground the other end. (connect it to the body on a clean metal spot) then turn the key on, but DONT start it. watch the Check Engine Light, count the flashes and pauses. EX. flash flash flash flash flash (repeat)
this is a 3-2 code, look that code up and find the error.
Try this link, ! http://www.extreme-check-engine-light-codes.com/Ford%20OBD1%20Decoder.htm
Check the codes with an OBD2 scan tool.
HAVE AN AUTO STORE OR SHOP HOOK UP THE OBD2 SCANNER TO SEE WHAT CODES ARE
Check the choke first to insure that it is working properly. Next check the computer codes for any possible issues that may be shown.
Check the engine. ===================================================== There is a problem with something that effects the emissions of the engine You need to have the vehicle scanned for any trouble codes to help diagnose and then repair the problem
If the Check Engine light is lit or has lit, that means the computer has detected a fault in either the performance or emmissions system of your vehicle. Have the OBDII terminal scanned for the trouble codes.
Plug in a scan tool.
If you have the codes read and repair what is wrong with the vehicle the light will go out on its own, or can be reset by the tech.
take it to auto zone and ask them to check and then clear the codes or remove the positive battery cable and press the brake pedal for 30 seconds.
Have the codes read.
you check the system for trouble codes.
Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.