Starter TestingVoltage Drop Test Ø The battery must be in good condition and fully charge prior to performing test. 1. Disable the ignition system. Verify that the vehicle will not start. 2. Connect a voltmeter between the positive terminal of the battery and the starter (B+)circuit. 3. Turn the ignition key to the START position and note the voltage on the meter. 4. If voltage reads (0.5) volts or more, there is high resistance in the starter cables or the cable ground, repair as necessary. If the voltage reading is ok proceed to the next step. 5. Connect a voltmeter between the positive terminal of the battery and the starter (M) circuit. 6. Turn the ignition key to the START position and note the voltage on the meter. 7. If voltage reads (0.5) volts or more, there is high resistance in the starter. Ø Many automotive parts stores have bench testers available for use by customers. A starter bench test is the most definitive way to determine the condition of your starter.
On the starter.
Check the starter, spark plugs, distributer cap, battery.
Where is the starter on 2003 ford mustang?
The 2003 Ford Expedition has a V8 engine.
The 2003 Ford Expedition has 16 valves.
The 2003 Ford Expedition is a gas-powered vehicle.
The 2003 Ford Expedition has a 4-speed automatic.
How do you replace a radiator on 2003 ford expedition?
The 2003 Ford Expedition has a 19.1 degrees angle of departure.
The 2003 Ford Expedition has single overhead cam (SOHC).
The 2003 Ford Expedition's turning circle is 38.7 ft..
The 2003 Ford Expedition has a drag coefficient of .41 Cd.