You can hook a vacuum gauge to a direct vacuum source on the intake manifold. There's several vacuum ports on the intake. Gauge should read at idle 18 to 21 inches of vacuum, the higher the better. If it has real low readings like below 18 Then if you KNOW for sure there's nothing else wrong with the engine, then it's probley the converter.
If you want to KNOW for sure then take the exhaust loose on both sides of the engine and go drive it. If it run's good and you like it, then put a converter on it.
YES, That would be a direct swop.
The 350 (5.7L) Chevrolet was installed in the 1500, 2500, & 3500 Chevy trucks. The Chevrolet Silverado had the 350 that year.
Yes I have one in a1990 silverado short bed with 350 and 5 speed automatic transmition.
yes make sure the exhuast heat riser passages in the heads that go through the intake have the gasket insert the same way as the tbi setup. why would you want the tbi ?
A failing cylinder
In the fuel tank
it should fit
In the glove box.?
An additional service manual and wiring schematic for an A1990 Kawasaki ZX6 motorcycle can be found on eBay as well as at specialty motorcycle dealerships.
how do you take out a transmission on a 1990 Honda accord
This card is worth about 25 cents.
Shave the head or change pistons. See Miata.net