Want this question answered?
You should try it and see. Go to the kitchen, get a clear glass of water, and add a drop of food colouring to it. Or ink, if you have it. It's probably how quick the ink spreads through the water
You can use black or blue ink to sign on a check. Actually there is no restriction on the color you can use to sign on a check as long as it does not blot on the check paper. Also, your writing should be clear and legible so that the bank authorities can verify it accurately.
clear
It is occording what color the ink is to turn water to that color. when mixing ink and water it does not seperate like oil and water. the ink mixes with the water ;D
Try milk and dab it on let it sit for a while, then sponge off with clear water.
Versamark ink is a clear, thick pigment ink. It is a slow-drying ink that is used in craft projects such as making cards. The ink is available in cube pads or as a pen.
Distillation is the method we use to obtain pure water from ink. Firstly you put inky water in a conical flask and turn on your Bunsen burner and the inky water starts boiling and the steam from that go into the condensing tube and then into the cooling tube and the steam turns back into water you have done distillation. But you have to remember that the water boiling point is 100 Celsius degrees and the boiling point of the ink is higher than Celsius 100 degrees so that it is left behind .
A teller can reject a check written in different ink unless it is signed.
If red ink is mixed with water and heated, the ink will begin to dissolve in the water. The heat will increase the rate at which the ink molecules separate and mix with the water molecules. Eventually, the ink will completely disperse in the water, resulting in a colored solution.
Evaporate the water, leaving the ink behind.
Iced ink (i stink)
The Waste Ink Tank is situated at the bottom of the DM100i. You need to call out an engineer to check it. Sometimes this is a false message. Eitherway you would need to phone Pitney Bowes and call out an engineer. The engineer will check if the waste tank is indeed empty. If so, he would replace the ink tank unit. Otherwise he will just clear the purge counter so as to clear the error message and you can carry on using the machine like normal.