Stick a 1/2 ratchet into the female bolt, on the passenger side about half way down.
Type F
Type F
transmission with 2 wheel drive is 24 pints transmission with 4 wheel drive is 27 pints
You could remove the transmission and pour it out of the rear driveshaft seal. But I would recommend dropping the pan.
If your changing the transmission filter, it takes five quarts. If the transmission is completely empty, it takes about ten quarts to fill it up.
The diagram of the 1974 Ford F100 transmission shows the location and direction of movement for all gears in the transmission. This diagram is designed to aid with the rebuilding or repair of a transmission.
15426378
Engin compartmet drivers side ther should be an object take the lide off and you should see your brake fluid level.
i cant remember what the engine are in them but if the bell hosing looks like the pattern of the engine it will fit
Answer to the best of my experanceif it is an automatic, find the dipstick to the transmission,and use afunnel to pour the right amount,but don't over fill it ,if it a standard, itshould have a plug on the side of the transsmission that screws in.remove it and using a funnel pour the right amountof the right fluid in it.
The Ford C4 transmission will fit.
locate a transmission shop and make an appointment