Go to someone who has a diagnostic meter , they will be able to tell you what is causing the problem, it is usually a sensor.
what to do when the malfuction light comes on?
The can with a drip is the oil indicator. If the light comes on, check the oil level (well, you should check the oil at least once a week).
The check power light on a vehicle is a warning indicator. A common cause of this is a improperly charged battery.
It has a 1 year, limited warranty that comes with every purchase from DaeWoo.
It depends on the indicator. Check engine means the engine computer has detected a malfunction. The oil can is an oil pressure problem, a battery is a charging problem, etc
depending on what your driving one eighth of a tank is left in the tank when your indicator light comes on
The computer is detecting a malfuction. The next time the light comes on, do not unhook the battery, take the car and have it checked for codes. You want to repair the cause, not ignore it.
The Daewoo Malfunction Indicator Lamp comes on for a bulb check when you turn the ignition switch to the 'on' position. The light should then go out when you start the car. If the light stays on, it means a problem was detected. One possible problem is that either the connectors or the harness shorted out, or that the circuit is open. It is also possible that the bulb needs to be replaced. In many cases, the cause is either an exceptionally high or low amount of voltage being sent to the ECM through the MIL at a time when the bulb should not be lit up.
Take it to auto zone and they will check the alt for free. You might clean the battery cables first.
the check engine light comes on for many reason or many parts usally emmision related.
I have an 01 Pontiac sunfire and I have noticed that the check gages light comes on when the gas is low. I have never seen any other indicator come on for low fuel.
The petrol light comes on because you are very,very low on petrol.